Cement finishes have become popular over the years.
But sometimes, they dont come cheap.
Watch the video below for the full instructions.
Image by: S&Vdesign
Once done, insert the metal strip with both ends extended and secure it with hot glue.
The ends will be used as hooks later on.
This will be the formwork for the sink.
Get the other container and mark the sink bottom and the middle of the handles using a marker.
Pour the solution into the container up until the mark.
Once done, place the formwork on top according to the marks and secure with a screw.
Place aggregates or objects on the bottom of the formwork container so it wont move.
Pour the mortar and vibrate to remove air bubbles.
Let it cure for 3 days.
Step 4:
Once its cured, dismantle the formwork.
you might use hot water to easily remove the mold.
Grind the top of the mold to smoothen, then make a hole in the center for the drain.
Remove the dust from the concrete sink and apply cement varnish.
