This is very easy to make, perfect for gifts to friends or families.
you’re able to even sell this to online selling platforms.
Read on for the full instructions.
Image by: sewingtimes
From that end, measure 2-1/4 vertically.
Cut the rectangle using a pair of scissors.
Step 2:
Fold in half and made a straight line on the fold.
From the center, measure 1-1/8 horizontally and mark.
From that, draw a 1 line vertically.
Next, from that end to the top center, make a curve.
Cut the curve, once you open it, it will look like a petal.
Once you are done, you will have 3 petals.
Step 3:
Get one outer fabric, and place it right side down.
Make a border for the two sides and on the top measuring 3/8.
Once done, place the petal pattern with the top on the borderline.
Next, on both bottom corners, draw a box measuring 1-1/8 in all sides.
Repeat for the other outer fabric.
Next, cut the curve on top with a 3/8 seam allowance.
Open and fold each side in half again meeting in the middle then fold them together.
Secure with pins and sew on the top and bottom.
Step 6:
Get one outer fabric and make a line from the top center measuring 3-3/4.
From that point, make a horizontal line.
Place both ends of the strip aligned in the middle.
The neds should extend a little bit on the horizontal line.
Sew 3-3/4 horizontally on the strip.
Once done, fold the strip upward then secure it with pins.
Measure the end of the flower pattern on the fabric on both sides.
From those ends measure 5/8 and mark.
Leave that open while sewing the side and bottom border with a 3/8 allowance.
Step 8:
Fold the bottom corners making a box.
Then sew with a 3/8 seam allowance.
Flip the right side out.
Fold the bottom corners making a box, then sew.
Step 10:
Place the outer fabric on the lining and secure it with pins.
Sew the petals on the curve lines with a 3/8 allowance.
Cut the seam allowance on the ends of the petal.
Step 11:
Pull the right side out from the opening and press with an iron.
Sew the petals again and make a top stitch.
Pull the other lining and sew the opening.
Step 12:
From the top of the petal, measure 2-1/4 and mark.
From that end make a line measuring 5/8.
Do this all around.
Step 13:
Insert the cords on the openings and tie them together.
Your sewing project is done!
