Step 1
Separate the spoon from the handles.
Cut them using a hand held hack saw.
Step 2
Smooth the rough edges of the spoon using a sand paper.
Step 4
Get your foam core board and trace a circle 18 inches in diameter.
Step 7
Cut the center of the board using the trace that you made for the mirror.
This would help us to cut easier later on.
This will help as a guide when we start to flip and glue them one by one.
Step 11
Next step is to glue the second layer of spoons.
This will be much simpler- all we need to do is just stagger and glue them in place.
ensure to glue it high enough up to cover the outer edges of the board.
verify to make a little bit of overhang to also cover the edges of the middle hole.
Step 13
Flip the board over and place the mirror at the center.
Now after your mirror is in a position that you want, start gluing it in place.
Step 14
Lastly, attach the hangers using your glue gun.
and your gorgeousDIY Blooming Flower Mirror Frame is done!
