Have tons of fabric scraps and dont know what to do with them?
Turn them into Donnas scrap buster table runner byJordan Fabrics.
Its a great quilt project as you’re able to use it to decorate your tables at home.
Image by: Jordan Fabrics
it’s possible for you to also gift them to your family or friends.
Watch the video below for the full instructions.
Stitch on the edge with a quarter-inch seam allowance.
Keep adding pieces until you cover the whole neutral strip.
Finger press the seam allowance towards the scrap pieces.
The scrap part should be on the right, aligned with the edge of the neutral strip.
Sew with a quarter-inch seam allowance.
Press the seam allowances towards the center.
Step 3:
Take it to your cutting board and trim off the selvages.
Once done, cut it into 2 1/2 pieces.
ensure that each piece has only 1 fabric design in the middle.
If there are 2, trim off the excess from the last fabric then continue cutting.
Repeat the whole process from step 1 to make 4 more strip units.
Put them right sides together and line them up so the intersection matches.
Stitch along its edge.
Open it up and finger press.
Get another one and do the same procedure.
Continue doing this until you have 17 in a row.
After that, make another 2 the same as the first row.
Iron it and go with the grain.
Do the same for the bottom.
Trim off the ends with a quarter inch beyond the intersection.
Get two more and place them on the top and bottom.
Trim off the jelly rolls if needed.
Place the first 2 rows right sides together and sew the edge.
see to it not to stitch over the points.
Do the same for the remaining pieces and sew them in a nice big block.
