Been wanting a water feature on your deck, porch, or garden space?
Here is an outdoor water wall DIY using an old shower door byeva monroeon Youtube.
The soothing and relaxing sounds of the flowing water will reward you once you finish this beautiful project!
Image by: eva monroe
you’re free to even add lights for a lovely accent at night.
Watch the video below for the full instructions.
The measurements of the box depend on the glass door.
So 4 pieces for the width and 4 pieces for the length of the boxes.
Then stack the two boxes together.
With the other 2 x 8 wood, create the sides and top of the water wall.
Make the sides an inch taller than your glass.
Measure the inside width of the box, from one end to another.
Cut the wood and place it just in front of the glass holder.
verify the space between the two is just as thick as the glass.
Once done, paint everything in black.
Step 5:
Sit the glass in between the holder.
Add some screws on the top front and back to secure the glass.
Step 6:
Cover the hole of the glass door with silicone.
Attach the rubber tubing using the C-clamps.
Make the framing of the water wall using the 1 x 8.
Once done, paint in black and attach to the sides and top.
Place the rocks on the divider and attach the pump and you are done.
